Operating instructions

If the dial remains stationary for more than 40 seconds the computer will reset (LCD will

go blank) requiring the operator to redial both combinations.

If you pass your number when dialing, please refer to page 3 or 18 for assis-

tance.

SUPERVISORY/SUBORDINASUPERVISORY/SUBORDINA

SUPERVISORY/SUBORDINA

TE MODETE MODE

TE MODE

In this mode, two combinations must be correctly dialed to open the lock. However,

the Supervisory Combination must be dialed first to display UL (Unlocked). This

allows the Subordinate combination holder(s) to gain access as often as desired by

dialing the Subordinate Combination. Whenever the Super is redialed to display LU

(Locked Up), the Subordinate holder(s) are again denied access.

UNLOCK IN SUPERVISORY/SUBORDINAUNLOCK IN SUPERVISORY/SUBORDINA

UNLOCK IN SUPERVISORY/SUBORDINA

TE MODETE MODE

TE MODE

Supervisory Operator:

Dial left to “power up” the lock.

When numbers appear on the display, continue dialing: (Example 25-50-75)

Dial:

Left to the first number in the Supervisory combination. Stop. (photo 1)

Right to the second number in the Supervisory combination. Stop. (photo 2)

Left to the third number in the Supervisory combination. Stop. (photo 3)

Right to UL (Unlocked) is displayed. (photo 4)

The X-07 will now operate as if it were in a single combination mode-only the Subordinate

combination is required to open the lock.