Manualshelf

Operating instructions

ManualsBrandsMas-Hamilton ManualsAutomotiveXX-07
12345678910
9
The new combination will be displayed twice, two digits at a time, followed by PO.
Note: If the correct combination is not displayed, you may pull out the change
key and the lock will allow you to reset the combination. You must pull out the
change key while the display is still flashing. When EC appears, insert the
change key again and dial the desired combination.
9. Pull out the Change Key. The Change Key symbol will disappear and dL will
appear.
10. Dial left. CC (Confirm Combination) will appear.
11. Dial right to dial the new combination again for confirmation. OP will appear.
The new combination is now set.
If Selection = 2 or 3, Dual Combination or Super/Sub Mode:
In Dual Combination Mode: Either of the two combinations can be entered
first.
In Supervisory/Subordinate Mode: Supervisory Combination must be entered
first.
7. Dial left until the symbol C1 (enter Combination 1) appears.
8. Dial right to dial the first new combination (Supervisory Combination if operating
in Super/Sub Mode) as if dialing the combination to open the lock.
EXAMPLE: Set Combination to30-60-90
E1 will appear.
Dial right to first number, 30. Stop. E2 will appear.
Dial right to second number, 60. Stop. E3 will appear.
Dial right to third number, 90. Stop.
The new combination will be displayed twice, two digits at a time, followed by dL.
Note: If the correct combination is not displayed, you may pull out the Change
Key and the lock will allow you to reset the combination. You must pull out
the Change Key while the display is still flashing. When C1 appears, insert
the Change Key again and dial the desired combination.
9. Dial left until the symbol C2 (Enter Combination 2) appears.
10. Dial right to dial the second new combination (Subordinate Combination if
operating in Super/Sub Mode) as if dialing the combination to open the lock.
EXAMPLE: Set Combination to 25-50-75
E1 will appear.
Dial right to first number, 25. Stop. E2 will appear.
Dial right to second number, 50. Stop. E3 will appear.
Dial right to third number,75. Stop.