Operating instructions

OPENING THE X-08/CEX-08 (FACTORY COMBINATION)

If you have not read the section on “Dialing the X-08”, it is important that

you do so before proceeding.

CW=ClockWise; CCW=CounterClockWise

1. Dial left (CCW) until lock is “powered”. Stop. E1 will be displayed.

2. Dial right (CW) until the first number of the factory combination, 50, appears on

the LCD.

Note: When dialing to the right after the E1, E2, or E3 prompts, the first

numbers to appear on the LCD will alternately be 00 or 50. DO NOT stop on

these numbers the first time they appear if they are part of your three number

combination. Continue to dial to the right until the number appears for the

second time.

Stop on 50 and wait until E2 appears, approximately two seconds.

3. After E2 with a right arrow appears, continue to dial right until you reach the

second number of the factory combination, 25. Stop on 25 and wait until E3 appears,

approximately two seconds.

4. After E3 with a right arrow appears, continue to dial right until you reach the third

number in the factory combination, 50.

Note: When dialing to the right after the E1, E2, or E3 prompts, the first

numbers to appear on the LCD will alternately be 00 or 50. DO NOT stop on

these numbers the first time they appear if they are part of your three number

combination. Continue to dial to the right until the number appears for the

second time.

Stop and wait until OP appears, approximately two seconds.

5. After OP with a right arrow (OPen right) is displayed, dial to the right to retract the

lock bolt.

Practice opening the lock several times with the preset factory combination before

you set a new combination. When you feel comfortable opening the X-08/CEX-08 using

the preset factory combination, you are ready to put the lock into operation.