Operating instructions

RESET CE CONDITION

If CE is displayed, then you will need to reset the Covert Entry condition using the

following steps. The lock must be powered down before beginning the reset process. The

same Reset Combination that is used for resetting the SA condition is used for reset-

ting the CE condition.

Note: The factory default for the Reset Combination is 50-25-50.

1. Dial continuously to the left (CCW) until the number of successful openings is

displayed.

2. Dial right to 99. E1 will appear.

3. Dial the Reset Combination as if dialing the combination to open the lock.

The Covert Entry condition should now be reset.

RESET SC CONDITION

A combination Covert Entry and Surreptitious Attempt condition is indicated by SC

displayed upon lock power up. Both conditions must be reset to return to normal lock

operation. CE must be reset first. For more detail than is presented below, see the indi-

vidual sections in the manual on resetting CE and SA.

RESET CE:

1. Dial continuously to the left (CCW) until the number of successful openings is

displayed.

2. Dial right to 99. E1 will appear.

3. Dial the Reset Combination as if dialing the combination to open the lock.

RESET SA:

1. Dial continuously to the left (CCW) until the number of successful openings is

displayed.

2. After the successful openings counter starts displaying, stop dialing. The display

will change to show the unsuccessful attempts counter along with a lightning bolt

and a right arrow.

3. Dial right to 99. E1 will appear.

4. Dial the Reset Combination as if dialing the combination to open the lock. A

lightning bolt will appear.

5. While the lightning bolt is displayed (indicating power is still up), dial left until

SA appears.

6. Dial the correct opening combination(s) for the lock, whether it be one combination

for single combination mode, two combinations for dual combination mode, or the

supervisory combination (to put lock in UL mode) followed by the subordinate

combination for Supervisory/Subordinate mode. The lightning bolt will continue

to be displayed during this time.