Operating instructions

AUDIT FEATURES OF THE LOCK

The X-08 lock tracks the number of successful openings for the lifetime of the lock. It also

tracks the number of consecutive unsuccessful attempts and will alert you upon lock

power up if there have been 3 or more consecutive unsuccessful attempts to open the

lock. The lock bolt must be extended and the lock allowed to power down prior to

obtaining an audit count.

TO CHECK THE NUMBER OF SUCCESSFUL OPENINGS

Start this process when the lock is powered down (i.e., the display is blank and there has

been no dialing for 15 seconds with the lock bolt extended). The number of successful

openings is a four digit number that will be displayed two digits at a time.

1. Dial continuously to the left (CCW) until the LCD display alternately flashes two

pairs of numbers. The number with the arrow flashing left represents the first two

numbers of the successful openings count. The number with the arrow flashing

right represents the last two numbers in the successful openings count.

Example: A display showing 00 (arrow left) and 15 (arrow right) means the lock

has been successfully opened a total of 0015 times.

The number of successful openings will reflect the total number of times the lock has

been opened since it was manufactured. When the lock has been opened 9,999 times, the

next time that the lock is opened the count will begin again at 0 and continue to incre-

ment.

TO CHECK THE NUMBER OF UNSUCCESSFUL ATTEMPTS

The X-08 keeps a record of the number of unsuccessful attempts to open the lock. This

count will only be displayed when there have been three or more consecutive unsuc-

cessful attempts. Start this process when the lock is powered down (i.e., the display

is blank and there has been no dialing for 15 seconds with the lock bolt extended).

1. Dial left (CCW) until lock is “powered”. If 3 or more consecutive unsuccessful

attempts have occurred, a lightning bolt along with the two digit count will be

displayed.

Once the count has been displayed, you can dial right to get the E1 display and enter

your combination.

Note: The unsuccessful attempts count resets to 0 only when the lock is

successfuly opened. If the number of unsuccessful attempts exceeds 99, the

count will remain at 99 until reset.