Operating instructions

USING THE X-08/CEX-08

If you have not read the section on “Dialing the X-08”, it is important that you do

so before proceeding.

SINGLE COMBINATION MODE

In this mode the X-08 functions much like a standard combination lock. It will open any

time the three-number combination is correctly dialed.

1. Dial left until lock is “powered”.

2. Dial right to dial the combination.

EXAMPLE: Combination = 30-60-90

E1 will be displayed.

Dial right to first number, 30. Stop. E2 will appear.

Dial right to second number, 60. Stop. E3 will appear.

Dial right to third number, 90. Stop. OP will appear.

3. Dial right to retract the lock bolt.

DUAL COMBINATION MODE

In this mode, two combinations must be correctly and consecutively entered to open the

lock. Either combination may be entered first; however, the second combination must

be started within 10 seconds after the first combination is completed.

First Operator:

1. Dial left until lock is “powered”.

2. Dial right to dial the first combination.

EXAMPLE: Combination = 25-50-75

E1 will be displayed.

Dial right to first number, 25. Stop. E2 will appear.

Dial right to second number, 50. Stop. E3 will appear.

Dial right to third number, 75. Stop. dL will appear.

Second Operator:

3. Dial to the left until C2 (enter Combination 2) is displayed.

EXAMPLE: Combination = 30-60-90

E1 will be displayed.

Dial right to first number, 30. Stop. E2 will appear.

Dial right to second number, 60. Stop. E3 will appear.

Dial right to third number, 90. Stop. OP will appear.

4. Dial right to retract the lock bolt.