Manual

22
- It may take up to 8 seconds for the beacons to wake up
- If the modem is not active and is not powered, the beacons will go into sleep
mode automatically after 1 minute
- The system may run the frequency search, if it is the very first time you’re
waking up the beacons. If this step does not work, disconnect the modem and
connect that beacon again via USB. Press the DEFAULT button in the
Dashboard and read all the buttons to make sure that the radio settings are
really the default ones
- Compare the radio settings on the modem and the radio settings on the
beacon. They must be the same
- Now you can check the height position of the beacons, RSSI, radio channel,
threshold, etc. on the panel on the right corner of the Dashboard
- It is possible to manage 30 beacons simultaneously. In current version one
modem supports 30 beacons. If you do not see some of your connected
beacons on the map, you may need to scroll to find their addresses
- Double click on the device both to put it into sleep mode and to wake it up
- The map will form and zoom in automatically