Manual

17
5.2 HEX programming
- After charging boards, download the latest stable SW package from
https://marvelmind.com/pics/marvelmind_SW_2017_11_15.zip
- Run the Dashboard and update the SW for all beacons and modem using
Dashboard => Firmware => Choose the file => Program
- If you see the message “Not found modem connection to computer through
USB” in the Dashboard, it usually means that the driver is not installed. To install
the driver, download it with link at top and run the installation file, then click on
the link under and install the driver
- Ensure that:
(a) You are programming the modem’s SW to the modem and the beacon’s SW to
the beacon;
(b) You are using SW for 4.9, if you have HW v4.9; and
- You have the SW from the same SW pack, i.e., the Dashboard SW, modem SW,
and beacon SW must be from the same SW pack. Don’t mix SW releases