Operation Manual
23
5. Interfaces
Indoor “GPS” system supports many external interfaces that can feed measured location data to
external system (robot, copter, VR).
There are two different ways to get mobile beacons’ location data from the system:
1. From mobile beacons
o Each mobile beacon knows its own position and doesn’t know position of
other mobile beacons
2. From modem/router
o Knows position of every mobile beacon in the system
One can get data from mobile beacons and from the modem at the same time, if need to do so.
List of supported interfaces is shown below:
More on the interfaces can be found on the link: http://marvelmind.com/#Interfaces