Operation Manual

18
4.2.23 If you see on the devices’ panel beacon colored orange, it means some settings between
beacons are different, for example: some sensors are off or some ultrasonic or radio settings are
different. You can change the settings for sensors manually by clicking on the panel in the right
corner of the dashboard and make grey cells green to turn on sensor. But for starting, it is very
much recommended to use default settings on all beacons and modem
4.2.24 After you froze the map of stationary beacons, wake up the mobile beacon. After it wakes up, it
will be traceable in 5-7 seconds
4.2.25 By now, the system must be fully operational