Operation Manual

17
If you see in the table some empty cells or marked yellow/red, it is an indication that distances between
some beacons are measured inconsistently or not measured at all. Try to check what the problems with
those beacons are. Try to re-position them, because, usually, there is an obstruction of some sort in the
between the beacons. Reset them.
Use View => Table of distances to monitor the measured distances between beacons
4.2.21 Freeze the map by clicking the button. Stationary beacons will stop measuring relative distances
and will be ready to measure distance from the mobile beacon(s)
4.2.22 Turn on and wake up mobile beacon similar to the operations with the stationary beacon:
https://youtu.be/A4aRsjH2-_E