Operation Manual
14
4.2 Setup software (Dashboard)
4.2.1 After charging boards download the latest stable software package from
http://www.marvelmind.com/#Download
4.2.2 Select the SW version of the portable or distribution and unzip
4.2.3 Run the Dashboard and update the SW for all beacons and modem using
Dashboard => Firmware => Choose the file => Program
4.2.4 If you see message in the Dashboard “Not found modem connection to computer through
USB”, usually, it means that the driver is not installed. To install the driver, download it with link
at top and run installation file” click on the link under, install the driver
4.2.5 Ensure that
(a) You are programming modem’s SW to modem and beacon’s SW to beacon
(b) You are using SW for 4.9, if you have HW v4.9
(c) You have the SW from the same SW pack, i.e. the Dashboard SW and modem SW
and beacon SW must be from the same SW pack. Don’t mix SW releases
4.2.6 While beacon/modem is connected to the Dashboard, press Default button in the Dashboard to
upload the default settings. See the print screen below: