Manual

210
9.6 Using the Oscilloscope
- Monitor the ultrasonic signal from one beacon to another
- Use Dashboard => View => Oscilloscope to monitor ultrasonic signals from
one beacon to another
- It is a very powerful tool, because it also gives information on the background
noise, level of the signal, echo, etc. With this tool, it is easy to set up the proper
ultrasonic threshold on the Dashboard.
Echo
External noises look
similarly. Thus,
choose the
ultrasonic threshold
below this value, for
example, -500 to -
2000
Type the reference beacon
number and press
Enter
Choose the beacon
to test
Ultrasonic signal
front
Trigger (red line)
Emittion counter