Manual

21
Super-Modem’s SW update
Marvelmind Super-Modem software consists of two parts:
- Low level firmware
- High level software for integrated Raspberry Pi single-board computer
Low level firmware is placed in general software package with all Marvelmind
software in ‘Super-Modem’ folder. This firmware can be updated via dashboard (hex
file) or via DFU (dfu file) like other firmware in the package. Please refer to Operating
Manual for details of updating software via dashboard or dfu.
High level software is located on micro-SD card inserted in the Raspberry Pi single-
board computer inside Super-Modem. To update this software, you should write on
this micro-SD card the image of micro-SD card with updated software. You can
download the image on downloads page (https://marvelmind.com/download/). The
image is placed in archive separately from general software package because its
size is pretty large (archive is about 1.5…2 GB).
Micro-SD card location