Manual

114
Step 6. Use right mouse click on cell you want to enter the
distance. Additional menu will open. There you can
control the table of distances. Choose Enter
distance for pair to enter the value.
Step 7. Now, enter measured (measure it with laser distance
meter or so) value. That values would not change until
you unfreeze or clear it. Even if beacons had been
moved, distance would stay. Be careful with frozen
cells because a small mistake can cause a huge
impact on your tracking.
Step 8. Repeat for all cells.
5.3.23 Freeze submap and by clicking the button. Stationary beacons will stop
measuring relative distances and will be ready to measure distance from
the mobile beacon(s).
5.3.24 Turn on and wake up the mobile beacon following the same steps as with
the stationary beacon: https://youtu.be/A4aRsjH2-_E
5.3.25 If you see on the devices’ panel in the Dashboard that the beacon is
colored orange, it means there are some differences in some of the
settings between beacons. For example, some sensors may be off or
freeze submap