Operation Manual

30
6.6 Modem/beacon’s quick control panel
Control panel allows user to interact with devices. It can work with one device, or with all devices in
the system.
List of functions:
Reset – Resets device
Sleep – Send device asleep (battery economy mode)
Wake up – Wakes up device (from sleeping mode)
Default – Drops all device’s settings to factory default
Time sync – Sends time from your PC to hedgehog (for stream it out via UART)
Additional Ctrl feature:
To apply action to all beacons in the system, use Ctrl + left mouse click on button
*Applicable only for buttons which turns bold while Ctrl is pressed