Manual

If everything is connected correctly, then you will see cylinders with green stripes. If
moving sticks on the equipment, they will change their length.
Note that when moving a stick which is responsible for "Pitch" up the green column fill
should decrease. If this is not the case, place the reverse of the corresponding channel
on the equipment.
• Press "Calibrate Radio" button, you will see message with recommendation to
remove propellers, after the program will ask you to move the sticks and all the
switches to their extreme positions, press "Ok" and move the sticks/switches in
different directions to their extreme positions. In this case, red borders appear that
correspond to the minimum and maximum value of the signal received from the
transmitter
• Press the button "Click when Done" and after the suggestion to return all the
switches and sticks to the starting position, a table with values will appear that
indicates the successful calibration of the equipment.
Stick ”pitch ”
in upper
position