Manual

91
from the mobile beacon(s)
4.6.25 Turn on and wake up the mobile beacon following the same steps
as with the stationary beacon: https://youtu.be/A4aRsjH2-_E
4.6.26 If you see on the devices’ panel in the Dashboard that the beacon is
colored orange, it means there are some differences in some of the
settings between beacons. For example, some sensors may be off
or some ultrasonic or radio settings may be different. You can
change the settings for sensors manually by clicking on the panel on
the upper right corner of the Dashboard to change the cells from
gray to green to turn on sensor. It is recommended that the default
settings on all beacons and the modem be used if this is your first
time using the system
4.6.27 After you freeze the map of stationary beacons, wake up the mobile
beacon. After it wakes up, it will be traceable within 5-7 seconds
4.6.28 The system is now fully operational