Manual

41
3.4.6 Industrial Super-Beacon Metal-25kHz
- Supports dual-use – RX and TX beacon. It
can transmit on its native ultrasonic
frequency (25kHz) and it can receive on
any ultrasonic frequency via an embedded
RX sensor – like Industrial-RX or Mini-RX
does. Effectively, the Industrial Super-
Beacons beacons combines inside an
Industrial-TX and Industrial-RX.
Additionally, the beacon supports both AI
and NIA architectures. Thus, it is called
Industrial Super-Beacon
- Electronics is IP67 protected
- Special IP67-protected 25-kHz transducers
- External antenna with SMA connector for extended radio range
- Corresponding IP67 connectors (male part) included
- No battery inside
- Extended working temperature range from -40°C to +50°C (not tested, provided by
design)
- Embedded reset switch and DFU switch – magnetic control
- Two IP67 external connectors:
RS485 modification pinouts
- Can work together with modems with corresponding radio (radio bands must match)
- Can work with any Mini-RX beacon or Beacon HW v4.9 with 25kHz ultrasonic sensors
(radio bands must match)
- Most of all designed to work together with Outdoor versions of Mini-RX beacons and
heavy outdoor Industrial-TX and Industrial-RX beacons (radio bands must match)
- Up to 30m with Beacon Mini-RX
- Optional external Converter-220V-12V-IP67
Uploading Beacon Industrial’s (Not super) DFU software to Industrial Super-
Beacon hardware make permanently damage for Industrial Super-Beacon board.
Be double attentive with update