Manual

226
10. Frequently Asked Questions
Please check this forum for more information. Here we will answer the most
common questions
1 What is the proper way to place the beacons?
- The actual distance between beacons must be ≤ 30m. Provide the line
of sight from one beacon to minimum two others
2 How far can beacons be located from modem?
- In the open space the distance from the modem to the beacon can reach
several hundred meters
3 What if hedgehog shown as orange circle or inside
in the Dashboard?
- Blue - normal mode and confident tracking
- Orange - system provides the best location data possible, but
confidence is lower, than blue
- - lost radio packets or no ultrasound coverage
4 What is the obstacle for ultrasound?
- The real obstacles for ultrasound are walls (concrete), glass, metal. If
you need to cover a multiple-floor territory you can use our Submap
feature in which case the tracking will not be interrupted
5 How the system works in very low and very high temperatures?
- System is designed for normal office-like conditions and temperatures 0
ºС - 40 ºС
- You can see some other types of beacon (outdoor, explosion safe, etc.)
in the comparison table
- We also possible to produce some special versions, which will suit your
case. Please write to [e-mail]
6 Are beacons resistant to explosions, dust, dirt, water, noise?
- - Low-frequency noise (motor noise, industrial equipment) does not
interfere with the normal operation of the system
- You can see some other types of beacon (outdoor, explosion safe, etc.)
in the comparison table
7 What is the time of delay between positioning the object and
respond?
- The delay is directly proportional to the update rate. For example, if
update rate is 16 Hz delay is 1.2:1.5x60ms
- The limit is 1.5x times the maximum distance between the stationary
beacons. To expand the service area, please follow the instructions
shown in the attached screenshot. Notice that positioning the mobile