Operation Manual

85
9.2 Using Oscilloscope
- Monitor ultrasonic signal from one beacon to another
- Use Dashboard => View => Oscilloscope to monitor ultrasonic signals from
one beacon to another
- It is a very powerful tool, because it gives also information on the background
noise, level of the signal, echo, etc. With this tool, it is easy to set up the proper
ultrasonic threshold on the Dashboard.
Echo
External noises look
similarly. Thus,
choose the
ultrasonic threshold
below this value, for
example, -500 to -
2000
Type the reference beacon
number. and press
Enter
Choose the beacon to
test
Ultrasonic signal
front