Operation Manual

62
2) Place 4 bacons on the ground, facing each other. (make a square,
where the edge points are beacons, looking in the center)
3) Place two beacons high on wall
4) Turn on RX4 only for beacons on the ground and RX4 and RX2 for
beacons on the wall
5) Build the first submap (horizontal) consisting of all ground beacons
6) Change Limitation distance to manual and input the value in the
submap’s settings
7) Freeze and lock it
8) Build the second submap (vertical) horizontally consisting of two wall
beacons and two ground beacons (neighboring with wall beacons)
9) Now, freeze it
10) Press axis rotation button
11) Click on the axis you want to rotate your submap along (when you
point the cursor on the axis, it became visible and pink-colored)
12) Enter the corner value (90° usually)