Manual

90
4.6.21 In the current version one modem supports 250 beacons (mobile +
stationary combined). If you do not see some of your connected
beacons on the map, you may need to scroll to find their addresses
4.6.22 Double click on the device to put it into sleep mode or wake it up
Only 4 stationary beacons may be in 1 submap. If you wake up more
beacons, create new submap for them. Or it won’t be displayed on
the map and in the table of distances
4.6.23 Build the map:
Industrial-RX beacons are not possible to build the
map automatically, so you have to build it manually
Step 1. Open the Dashboard. You will see the table of
distances
Step 2. Use right mouse click on cell you want to enter the
distance. Additional menu will open. There you can
control the table of distances. Choose Enter
distance for pair to enter the value
Step 3. Now, enter measured (measure it with laser distance
meter or so) value. That values would not change
until you unfreeze or clear it. Even if beacons had
been moved, distance would stay. Be careful with
frozen cells because a small mistake can cause a
huge impact on your tracking
Step 4. Repeat for all cells
4.6.24 Freeze the map by clicking the button. Stationary beacons will stop
measuring relative distances and will be ready to measure distance