Manual

103
- After uploading DFU driver by DfuSe short circuit pins as
shown on the picture (for v4.9) and press Reset button
- Modem will go to DFU mode. Press UPGRADE button in
the DfuSe program
- After a couple of seconds, the DFU will be uploaded to the
modem. Make sure it takes 1-3 seconds and does not
happen immediately. Otherwise, the SW has not uploaded
correctly. If the DFU appears to upload immediately, check
the "Choose" button you used or change the version of
DfuSe SW to a different one.
- Disconnect the short circuit.
- Start the Dashboard and press RESET button
If you have uploaded the latest firmware for all the boards, you can start to activate
the system:
5.2.6 While the beacon or modem is connected to the Dashboard, click the
DEFAULT button on the Dashboard to upload the default settings