Manual

88
6.3.27. Enter the height of stationary beacons. Choose beacon in the list and enter
height value
Enter the height for mobile beacon if you are using 2D mode
6.3.28. In the current version one modem supports 250 beacons (mobile +
stationary combined). If you do not see some of your connected beacons on
the map, you may need to scroll to find their addresses
6.3.29. Double click on the device both to put it into sleep mode and to wake
it up
6.3.30. The map will form and zoom in automatically
6.3.31. If the map does not form well, check the table of distances in the left
corner of the Dashboard. The cells must be colored in white; it means the
distances between stationary beacons are measured correctly