Manual

85
6.3.15. Write down the beacon’s address for future use or change the address at
your convenience. Enter device address and press ENTER, after - press
write changes button. Beacons addresses should not be repeated.
6.3.16. Press the RESET button on your beacons and modem after programming
6.3.17. After programming devices with the latest software, the modem and
beacons are ready for use
6.3.18. Place the stationary beacons high on the walls vertically in a way that will
provide optimal ultrasonic coverage. Write down the beacon’s height for future
change in the settings. The help video on installation can be found here - Help:
how to place beacons