Manual

73
5.2.2. SW update via Radio
Usually, SW update via USB is used for the very first time you are starting up the system.
It allows you to make an update up to actual SW version very quickly before system
deployment.
Pros: Allows you to keep your system in its place and update SW remotely
Cons: Not as fast as USB SW update
How to:
- Launch the Dashboard
- Make sure that the modem is connected to the Dashboard (via USB)
- Ensure that you can see your beacons via radio in the Dashboard
- Click on the beacon you want to update (In the bottom devices’ list)
- go to “Firmware” → “Upload firmware” → Choose .hex SW file for your device
(Be careful with IA and NIA architectures, do not mix them)
- Click “Next”
- Wait until beacon update finishes
- Repeat for all your beacons
- Note: with additional license you can enable simultaneous update of multiple
beacons (stationary and mobile)