Manual

5.1.3. How to update Super-Modem’s SW (for SW version older

than v7.000):

Do not disassemble the Super-Modem before you check the SW version installed. First of all,

check if the SW version of your Super-Modem is up to date (Latest version on the Marvelmind

Downloads page). If not – update the software as described below

Follow the steps below to update Super-Modem’s SW.

5.1.3.1. Open Super-Modem enclosure

5.1.3.2. Eject the micro-SD card (Super-Modem should not be powered at this

time)

5.1.3.3. Insert micro-SD card into any MS Windows computer via card reader

5.1.3.4. Download and unpack the archive with image of updated software

5.1.3.5. Install and run Win32 disk imager program (supplied in the archive with

image)

5.1.3.6. Open the image file and write to the micro-SD card (see screenshot

below)

5.1.3.7. Eject micro-SD card from computer and insert back into Super-Modem

5.1.3.8. Close Super-Modem enclosure