Manual

66
5.1.2. How to update Super-Modem (for SW version from v7.000)
In latest versions of SW it’s possible to flash Super-Modem without dissembling.
5.1.2.1. Connect power Supply to Super-Modem and connect Super-Modem to
PC via USB. Wait for 1 minute till it appears in Dashboard
5.1.2.2. There are two Firmware versions – Low level (Firmware version) and
High level (High level software version). Both of them should be flashed
from the same pack.
5.1.2.3. Go to Firmware => Upload firmware