Manual

130
7.9. Detailed settings
This bar allows user to adjust devices very precisely. It contains a lot of parameters for
advanced usage
7.9.1. Modem Settings
7.9.1.1. Basic Settings
Location update rate settings: 1/20Hz – 16Hz+.
Notice that real update rate may be limited by distances
between beacons or radio profile
Unique processor ID for each device (beacon or modem)
Firmware version of device (beacon or modem)
Architecture type (IA or NIA)
Power supply voltage of the device 5V+-0.2V is OK
Time from the latest reset
Strength of the radio signal from modem to beacons and
vice versa. Maintain in the range of -25dBm to -80..-
90dBm. Higher value - may overload. Lower – lost packets
Strength of the radio signal to modem from beacons and
vice versa. Maintain in the range of -25dBm to -80..-
90dBm. Higher value - may overload. Lower – lost packets
Exact working frequency
Chosen working band