Manual

116
6.6.20. Enter the height of stationary beacons. Choose beacon in the list and
enter height value
Enter the height for mobile beacon if you use 2D mode
6.6.21. In the current version one modem supports 250 beacons (mobile +
stationary combined). If you do not see some of your connected beacons on
the map, you may need to scroll to find their addresses
6.6.22. Double click on the device to put it into sleep mode or wake it up
Only 4 stationary beacons may be in 1 submap. If you wake up more beacons,
create new submap for them. Or it won’t be displayed on the map and in the table
of distances
6.6.23. Build the map:
Industrial-RX beacons are not possible to build the map automatically, so you
have to build it manually
6.6.23.1. Open the Dashboard. You will see the table of distances
6.6.23.2. Right click on the cell where you want to enter the distance. Additional
menu will open. There you can control the table of distances. Choose
Enter distance for pair to enter the value