Manual

113
6.6.5.16. After a couple of seconds, the DFU will be uploaded to the modem. Make
sure it takes 1-3 seconds and does not happen instantly. Otherwise, the
SW has not been uploaded correctly. If the DFU appears to upload
immediately, check the "Choose" button you used or change the version
of DfuSe SW to a different one.
6.6.5.17. Disconnect the short circuit.
6.6.5.18. Start the Dashboard and press RESET button.
6.6.6. If you have uploaded the latest firmware for all the boards, you can start to
activate the system:
6.6.7. While the beacon or modem is connected to the Dashboard, click the
DEFAULT button on the Dashboard to upload the default settings