Manual

108
6.5.25. If you see on the devices’ panel in the Dashboard that the beacon is
colored orange, it means there are some differences in some of the settings
between beacons. For example, some sensors may be off or some ultrasonic
or radio settings may be different. You can change the settings for sensors
manually by clicking on the panel on the upper right corner of the Dashboard
to change the cells from gray to green to turn on sensor. It is recommended
that the default settings on all beacons and the modem be used if this is your
first time using the system.
6.5.26. After you freeze the map of stationary beacons, wake up the mobile
beacon. After it wakes up, it will be traceable in 5-7 seconds.
6.5.27. The system is now fully operational.