Manual

107
6.5.22.1. Open the Dashboard. You will see the table of distances
6.5.22.2. Right click on the cell where you want to enter the distance. Additional
menu will open. There you can control the table of distances. Choose
Enter distance for pair to enter the value
6.5.22.3. Now, enter measured (measure it with laser distance meter or so) value.
That values would not change until you unfreeze or clear it. Even if
beacons had been moved, distance would stay. Be careful with frozen
cells because a small mistake can cause a significant impact on your
tracking
6.5.22.4. Repeat for all cells
6.5.23. Freeze the map by clicking the button. Stationary beacons will stop
measuring relative distances and will be ready to measure distance from the
mobile beacon(s)
6.5.24. Turn on and wake up the mobile beacon following the same steps as with
the stationary beacon: https://youtu.be/A4aRsjH2-_E