Manual

104

6.5.7. Write down the beacon’s address for future use or change the address at

your convenience as shown here

6.5.8. Press the RESET button on your beacons and modem after programming

6.5.9. After programming devices with the latest software, the modem and beacons

are ready for use

6.5.10. Place the stationary beacons high on the walls vertically in a way that will

provide optimal ultrasonic coverage. Write down the beacon’s height for future

change in the settings. The help video on installation can be found here -

https://youtu.be/WY0HkLzmjys

Side view:

Stationary beacon

Mobile beacon

Modem

beacon