Manual

100
DIP switches
Reset
Reset button (on side)
6.5. Starter Set NIA-SmallDrone
The steps below describe the very first time you set up the system. Super-Beacon, Mini-
TX beacons and modem required. Note: steps below feature the Mini-RX, which is not
part of the set anymore. This will be updated later, but the process is still the same.
Super-Beacon and Mini-TX have different HW and SW from HW v4.9. Use Super-
Beacon SW for Super-Beacons, Mini-TX SW for Mini-TX beacons, HW v4.9’s SW for
HW v4.9
6.5.1. Unpack the system. Take a look at a similar unpacking video of HW v4.9.
The videos have certain differences but the basic are the same:
https://youtu.be/sOce7B2_6Sk
6.5.2. Charge all the beacons using USB cable. Full charging takes about 1-2 hours
6.5.3. Turn the beacons on
6.5.4. Download SW Pack
6.5.5. Update all the beacons:
DIP switches
Reset button