Data Sheet

88
settings
4.6.7 Write down the beacon’s address for future use or change the
address at your convenience as shown here
4.6.8 Press the RESET (Industrial beacons have magnetic re button on
your beacons and modem after programming
4.6.9 After programming devices with the latest software, the modem and
beacons are ready for use
4.6.10 Place the stationary beacons high on the walls vertically in a way
that will provide optimal ultrasonic coverage. Write down the
beacon’s height for future change in the settings. The help video on
installation can be found here - https://youtu.be/WY0HkLzmjys