Data Sheet

117
6.2 Table of distances
Table of distances shows the measured distance between all beacons. The map and its graphical
visualization depend on distances, which is a very important part of the system.
There are two ways of measuring:
1) Measuring by ultrasound (automatic)
2) Measuring by user (manual)
*Measuring by ultrasound is impossible for Mini-RX and Industrial-RX beacons
*In noisy cases and cases with long distances it is better to use manual input
1) Measuring by ultrasound:
- In most cases, the system builds the table of distances automatically. If everything is
good, there would be figures in cells, they would be changing a little; the color of each
cell would be white
- If color differs, check the colors’ definitions (next page) and solve the problem
- Freeze the map only if cells are white
2) Measuring by user (necessary for Mini-RX beacons and noisy cases):
- Use manual input if table of distances didn’t build. It may happen if environment is
very noisy, or distances are very huge
- In that case, cells’ color would be green
- Be careful with figures because a small mistake in the values will cause mistakes in
location
How to freeze/enter distance manually:
Step 1. Open the Dashboard. You will see the table of distances
Step 2. Use right mouse click on cell you want to freeze/enter. Additional
menu will open. There you can control the table of distances.
Choose Freeze distance for pair to freeze it