User's Manual

CHAPTER 3: Maintaining and Upgrading Your Notebook www.gateway.com
44
12 Remove the four screws that secure the hard drive to the hard drive
bracket.
13 Remove the bracket from the old drive.
14 Place the new drive, label side up, onto the bracket so the screw holes line
up.
15 Replace the screws that secure the bracket to the drive.
16 Slide the new hard drive kit into your notebook, then replace the screw
that secures the hard drive kit to the notebook.
17 Insert the battery, then turn your notebook over.
18 Connect the power adapter, modem cable, and network cable
19 Turn on your notebook.
20 For instructions on installing Windows, your drivers, and your applications,
see the “Recovering Your System” chapter you printed in Step 2.
21 Reconnect all peripheral devices and replace any Express cards.
Screw
Screw
Screw
Screw