User's Manual

Connecting a video camera to your notebook
www.gateway.com
31
e Click Help. for instructions on adjusting the television properties.
Connecting a video camera to your notebook
Important
For more information about using the
IEEE 1394 port on your video camera, see
your camera’s documentation.
Tips & Tricks
For the location of the IEEE 1394 port on
your notebook, see “Right” on page 7.
Tips & Tricks
For more information about editing
video, see your User Guide.
Your notebook has a 4-pin IEEE 1394 port (also known as a Firewire® or i.Link®
port) for connecting devices such as a video camera.
To connect your video camera to your notebook:
1 Connect one end of the IEEE 1394 cable to your video camera.
2 Connect the other end of the cable to the IEEE 1394 port on your
notebook.
Changing batteries
Replacing the battery
Warning
Danger of explosion if battery is
incorrectly replaced.
Replace only with a battery specifically
manufactured for your Gateway
notebook. Discard used batteries
according to local hazardous material
regulations.
The battery used in this device may
present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat
above 212°F (100°C), or incinerate.
Dispose of used battery promptly. Keep
away from children.
Caution
If your notebook is connected to AC
power, you can change the battery while
the notebook is turned on. If your
notebook is not plugged into an AC
outlet, you must turn the notebook off
while changing the battery or you will
lose any unsaved data.
To replace the battery:
1 If your notebook is on and is connected directly to AC power, go to Step 2.
-OR-
If your notebook is on and is not plugged into an AC outlet, save your work
and turn off the notebook.
2 Close the LCD panel.
3 Turn your notebook over so the bottom is facing up.
4 Slide the battery lock to the unlocked position.
5 Slide the battery release latch.