User's Manual
Table Of Contents
- Table of Content
- _
- _
- _
- _
- _
- _
- _
- _
- _
- How to: Setup of an Ad-Hoc network using UAY-MMC85M wireless cards
Setup of an Ad-Hoc network using UAY-
MMC85M wireless cards
Marvell AppNote
AN -xxxx
Page 40 Marvell
®
Proprietary. V 1.0
5. Please follow the steps 1-4 a couple of times, in case association does not take
place.
3.2] Link Instability
Sometimes the link between the Master and Slave can be quite unstable. In such a case,
please look for any loose connections in the setup. Please confirm that all the pads have
correct attenuation.
3.3] Video cannot be played
This can happen due to improper channel loading. In such cases, look at the Tx/Rx Rates
as seen in the Network Status tab below. If the rates stabilize around 6Mbps, the video
file cannot be played, even though the ping between the master and slave is successful. It
is preferred to unplug both the UAY-MMC85M extender assemblies and plug them back
starting with the Master assembly.