User's Manual
Table Of Contents
- Table of Content
- _
- _
- _
- _
- _
- _
- _
- _
- _
- How to: Setup of an Ad-Hoc network using UAY-MMC85M wireless cards
Setup of an Ad-Hoc network using UAY-
MMC85M wireless cards
Marvell AppNote
AN -xxxx
Page 39 Marvell
®
Proprietary. V 1.0
3] Debugging Ad-Hoc Setup
3.1] Slave does not associate with the Master
Sometimes the Slave would not join the Ad-Hoc network and would start the radar mode
channel availability process. This can be seen when a message shown below is seen in
the Dbgview window.
When such messages are seen in the Dbgview window on the slave, do the following:
1. Unplug the Master and the Slave UAY-MMC85M assemblies.
2. Plug in the Master assembly first.
3. Wait for the CAC time period, until the Dbgview window in Master shows the
message Starting adhoc network on channel.
4. Plug back the Slave assembly and wait for association to take place.