User's Manual

MC8687P Mini PCIe WLAN Client Card User’s Guide
________________________________________________________________________
________________________________________________________________________
Doc. No________ Rev.V1.0 Confidential Copyright © 2007 Marvell
Page
48 Document Classification: Proprietary Information December 28, 2007
Auto Connect if link loss or no connection (use checked profile in <Profile
Manager>): Clear this check box to disable the auto-configuration feature.
Whenever there is a link loss, auto-configuration tries to establish a connection to
the checked profiles in the Profile Manager window.
Enable WMM: Select this check box to enable/disable the Wireless Multimedia
Enhancements (WMM) feature.
Boost Mode: Select this check box to enable Wireless Provisioning Services
(WPS).
Worldwide Regulatory Domain: Select this check box to set the regulatory
domain.
DFS Mode: Not available for b/g device.
Advanced Bean Forming: Not available for b/g device.
3.6 AutoLink Tab
To enable AutoLink mode, proceed as follows:
1. Toggle the AutoLink button on the Access Point to enable AutoLink mode.
2. On the AutoLink tab, click AutoLink. Within 60 seconds, the AutoLink will
be completed.
Figure 51: AutoLink Tab