User's Manual

MC8687P Mini PCIe WLAN Client Card User’s Guide
________________________________________________________________________
________________________________________________________________________
Doc. No________ Rev.V1.0 Confidential Copyright © 2007 Marvell
Page
27 Document Classification: Proprietary Information December 28, 2007
15. If CCX compatibility is required, select the Enable Cisco Compatibility
Extensions (CCX) check box.
16. Click Save to set the configuration.
3.2.4.2 802.X WPA / WPA2 with PEAP
Figure 26: Security Tab – WPA2 with PEAP
The definition of the PEAP authentication protocol for the authentication modes
802.1X, WPA, and WPA2 is identical:
1. Select Protected EAP (PEAP) as 802.1X Authentication Protocol.
2. Click Configure. The Protected EAP (PEAP) window is displayed.