Specifications

39
MV01-94000-00
Rev C
Installing Transfer Handles
1. Align Transfer Handle on top of Seat Pan Assembly at slot at front corner.
2. Insert two bolts and tighten to 6Nm. WARNING: Use “Threadlocker Loctite 242” to
lock threaded fasteners against vibration loosening. Threadlocker Loctite 242 allows
for fasteners to be removed with hand tools. Failure to heed these warnings could
cause damage to your wheelchair, injury to yourself, a fall, a tip-over and/or loss of
control, causing severe injury to yourself or others.
3. Repeat on opposite side.
Installing Push Handles
1. Be sure that your chair is equipped with a Dual Cane Seatback Backrest Assembly.