Specifications

33
MV01-94000-00
Rev C
2. Slide the frame along the seat section to the desired seat angle.
3. WARNING: Use “Threadlocker Loctite 242” to lock threaded fasteners against
vibration loosening. Threadlocker Loctite 242 allows for fasteners to be removed
with hand tools. Tighten the four bolts attaching the shock to the tracks on the
seat section. (Tighten to six newton meters (Nm) or five foot pounds). Failure to
heed these warnings could cause damage to your wheelchair, injury to yourself, a
fall, a tip-over and/or loss of control, causing severe injury to yourself or others.
Adjusting the Length of the Caster Wing
1. Remove the Caster Wing (See instructions entitled “Removing the Caster Wing”)