Specifications

29
MV01-94000-00
Rev C
17. For 2, 4, and 6 degrees camber tubes, use a carpenter’s square to ensure the milled
edge (flat section) on the camber tube is perpendicular to the floor. This will assure
equivalent camber on both wheels.
18. WARNING: Use “Threadlocker Loctite 242” to lock threaded fasteners against
vibration loosening. Threadlocker Loctite 242 allows for fasteners to be removed
with hand tools. Tighten both Camber Tube Collars. (Tighten to six newton meters
(Nm) or five foot pounds). Failure to heed these warnings could cause damage to
your wheelchair, injury to yourself, a fall, a tip-over and/or loss of control, causing
severe injury to yourself or others.