Specifications

22
MV01-94000-00
Rev C
quick release axle pin 99mm into the Torsion Bushing until contact.
2. Release black button.
3. WARNING: Test to ensure Caster Wing is locked by pulling Caster Wing away from
the wheelchair. Failure to heed these warnings could cause damage to your
wheelchair, injury to yourself, a fall, a tip-over and/or loss of control, causing severe
injury to yourself or others.
4. IMPORTANT: There is a Safety Groove to protect against unwanted release.
5. WARNING: Make certain the Caster Wing is fully engaged and not in the Safety
Groove. Failure to follow this direction can lead to unsafe instability and poor
performance. Failure to heed these warnings could cause damage to your
wheelchair, injury to yourself, a fall, a tip-over and/or loss of control, causing severe
injury to yourself or others.
Adjusting Footrest Height
1. Rider must be out of the wheelchair.
2. Insert 4mm Allen Wrench (Key) into Footrest Adjusters.