Specifications

MV01-94000-00

Rev C

2. Loosen all four (4) Backrest Height Adjusters by turning counterclockwise.

3. Adjust Backrest to desired position.

4. IMPORTANT: Make sure the Backrest Height Adjuster Clamp is fully engaged with the

Backrest Post.

5. WARNING: Use “Threadlocker Loctite 242” to lock threaded fasteners against

vibration loosening. Threadlocker Loctite 242 allows for fasteners to be removed

with hand tools. Tighten all four (4) Backrest Height Adjusters by turning clockwise.

(Tighten to six newton meters (Nm) or five foot pounds). Failure to heed these

warnings could cause damage to your wheelchair, injury to yourself, a fall, a tip-over

and/or loss of control, causing severe injury to yourself or others.