Specifications

MV01-94000-00

Rev C

Allen Wrench (Key) into Macro Backrest Adjuster bolts.

2. Loosen both Macro Backrest Adjuster bolts by turning counterclockwise

3. Slide bracket to appropriate position.

4. WARNING: Use “Threadlocker Loctite 242” to lock threaded fasteners against

vibration loosening. Threadlocker Loctite 242 allows for fasteners to be removed

with hand tools. Tighten both Macro Backrest Adjuster bolts by turning clockwise.

(Tighten to six newton meters (Nm) or five foot pounds). Failure to heed these

warnings could cause damage to your wheelchair, injury to yourself, a fall, a tip-over

and/or loss of control, causing severe injury to yourself or others.

Adjusting Backrest Height

1. Insert 4mm Allen Wrench (Key) into Backrest Height Adjusters.